Standard Heights and Lengths

STANDARD HEIGHTS

Standard Heights To Ground Level
Residential Commercial
3', 4', 5', 6' 5', 6', 7', 8'

STANDARD LENGTHS

Standard Lengths
Residential Commercial
94", 120", 143 1/2" 94", 118"
Light
  • 1’’ Square Top & Bottom Rail, 16ga
  • 5/8" Square Pickets, 18ga.
  • Spacing Between Pickets: 3 7/8" actual (Meets Pool Code)
Heavy
  • 1 1/2" Square Top & Bottom Rail, 14ga
  • 3/4" Square Pickets, 16ga
  • Spacing Between Pickets Can Be: 4" or 5 1/4" actual *3 7/8" optional
Xtra-Heavy
  • 2" rail, 14 ga
  • 1" pickets, 16 ga
  • Spacing Between Pickets Can Be: 4" or 5" actual *3 7/8" optional

BFC Finish

GALVA-GUARD I, II and III

Provide long lasting beauty and superior corrosion protection.

I-Recommended Paint Finish

  • Tubing Galvanized before Fabrication
  • Power Washed for Paint Preparation
  • One Spray Coat High Solids Primer
  • One Spray Coat Polyurethane Black
  • Custom Colors Available at Additional Cost
  • Choose from 14 Standard Colors - add 5%

II-For Even More Protection

After fabrication, materials are

  • Hot-dipped galvanized per ASTM-A 123
  • Finished with one spray coat of high solids polyurethane primer
  • One spray coat of gloss black polyurethane paint

III-Recommended Powder Finish

Materials are fabricated using

  • Galvanized tubing
  • Finished with one powder coat of zinc-rich epoxy primer
  • One coat of polyester powder coat black

BFC POLY PRO + (Polyurethane Painted)


BFC also offers the following more economical finish for use in dry, non-corrosive environments.

BFC POLY PRO + (Polyurethane Painted)


After fabrication, materials are

  • Power washed in an iron phosphate solution
  • Receive one spray coat of high solids polyurethane primer
  • One spray coat of high solids gloss black polyurethane paint

Two-Coat

  • Power washed for paint preparation
  • One shop prime coat
  • One top coat black enamel

One-Coat

  • Power washed for paint preparation
  • One shop prime coat